Mounting Rail System for
Counterweights and Accessories
These universal rails are mounted on the top or bottom
of the OTA for holding counterweights, guide scopes,
cameras and other accessories. Black hardcoat anodized
aluminum rails are drilled and ready to mount on your
scope with the supplied stainless steel hardware. Allen
Accessories and counterweights attach to the rails with
cars that slide to any position on the rail and grip firmly
when tightened. The cars can be removed out the ends
of the rails for quick mounting and dismounting.
Cylindrical counterweights can be mounted on end or side
mounted. When side mounted, the weight can be centered
or mounted off axis for balancing in the 'third dimension.'
Counterweights can also be joined end to end. No-tools
hardware for all mounting possibilities is included in the
CWK2 Balance Kit.
The 1 lb Threaded Adjustable Counterweights are threaded
all the way through and can be adjusted up and down the
extension rod for balancing in the 'second dimension.'
--- Mounting hardware included
. . . . <== Hey! Click This When Ordering Kits!
Prices include shipping in the USA!
Specify telescope type and size when ordering!
- - Celestron 8" OTA Warning!
- - Celestron 9.25" OTA Warning!
ST80 mounted with #CR35 cradle rings and #MRS6 M6 Scope
Rings Mounting kit.
Piggyback kits are here
Alternate direct ring mounting with #MRS6 M6 Scope Rings Mounting kit
SLR mounted with the #MRCM 1/4-20 Camera Mounting Kit,
with the lens held in an optional cradle ring. The three point
centering option for is suggested for smaller diameter lenses.
Sky Scout mounted with #MRCM
Mounting Rail Lengths:
#MRC8 13.00" - - Celestron 8" OTA Warning!
#MRC9 18.3" - - Celestron 9.25" OTA Warning!
Celestron 8" OTA Warning is Here!
Celestron 9.25" OTA Warning is Here!
Telescope Balancing Kits are Here
Piggyback Scope Mounting Kits are Here
Scope Mounting Rings are Here
Example Piggyback Mountings