Camera and T-Thread Adapters
The combination of a T-adapter and a Camera T-thread Ring
adapt your camera to the telescope for direct or eyepiece
The 1.25" and 2" T-adapters fit in place of an eyepiece, and
the SCT T-adapters connect directly to the visual back of SCTs.
#TASC can hold a 1.25" EP, #TASS is 1" long, #TASL is 2" long,
both have 1.5" ID. A 1.25" eyepiece fits inside the #TAPP adapter
for eyepiece projection. #TAPP, #TA2P, #TADP and #TADQ are
threaded for filters.
#TADP and #TADQ have the same function, except #TADQ has
about 1/8" shorter optical path than #TADP. Both are threaded
for 1.25" filters. Neither has a "safety groove" or recess.
#TA2P unscrews into two pieces that also have SCT Schmidt threads,
and now has no recess on the barrel.
#TASC, TASS and #TASL have SCT threaded collar rings to allow
rotation for orientation.
Choose the proper Camera T-thread ring to mate T-threads to your camera.
Some available with M48 threads too!
--- Camera T-thread Rings have M42 X .75 female threads
--- #TTCE48 and #TTNK48 have M48 X .75 female threads
Prices include shipping in the USA!